P-36
1May 1, 2021P-36 from Wright Field. These are the marking I will use for the building
2May 1, 2021
3May 1, 2021
4May 1, 2021Kit box art. Kit dates back to 1967
5May 1, 2021Kit instruction
6May 1, 2021Kit instruction
7May 1, 2021Kit instruction
8May 1, 2021Check out the old Monogram Catalog that came with the kit
9May 1, 2021Check out Catalog
10May 1, 2021Kit parts
11May 1, 2021Kit parts, some flash
12May 1, 2021I wash and clean kit parts before starting build
13May 7, 2021Kit fuselage, no side wall details
14May 7, 2021Kit lower wing
15May 7, 2021Kit wings
16May 7, 2021I drilled out the kit exhaults
17May 7, 2021Hatched area needs to be removed
18May 7, 2021Hatched areas need to be removed
19May 7, 2021Kit Wings
20May 7, 2021Hatched area needs to be removed.
21May 7, 2021Remove hatched area.
22May 7, 2021No cockpit details. Need to remove hatched area.
23May 7, 2021I made an engine front fire wall.
24May 7, 2021
25May 7, 2021Need to grind off wing lip
26May 7, 2021Grind kit wing lip.
27May 7, 2021Need to grind off kit wing lip, to clear new wheel well roof
28May 7, 2021Kit as open wheel wells, I will enclose them. I also covered the wing gun shell ports.
29May 7, 2021
30May 7, 2021Tops of new wheel wells
31May 7, 2021Kit wings
32May 7, 2021Kit wheel well are open so I enclosed them.
33May 7, 2021Enclosed wheel wells.
34May 7, 2021Enclosed wheel wells.
35May 7, 2021Kit as no cockpit details so I added some.
36May 7, 2021I will use the Airfix P-40 cockpit floor for my P-36
37May 7, 2021Added details to cockpit floor
38May 7, 2021Painted cockpit floor
39May 7, 2021New cockpit floor
40May 7, 2021The kit has no seat, so I will add a resin seat
41May 7, 2021Resin seat
42May 7, 2021Painted side wall details
43May 7, 2021
44May 7, 2021
45May 7, 2021Instilled front fire wall
46May 7, 2021Added some details to kit engine
47May 7, 2021Painted engine
48May 7, 2021Engine installed
49May 7, 2021
50May 7, 2021
51May 7, 2021
52May 7, 2021Fuselage and cockpit
53May 7, 2021Cockpit floor installed
54May 7, 2021Fuselage and wing
55May 7, 2021
56May 7, 2021
57May 7, 2021
58May 7, 2021
59October 27, 2021
60October 27, 2021
61October 27, 2021
62October 31, 2021I will test Vallejo Model Air Aluminum on a spare P-36 wing.
63October 31, 2021Paint went down nice with a little thinner
64October 31, 2021I will test a decal with Set and Sol on painted wing
65October 31, 2021Test Decal with down nice with no problems
66October 31, 2021I saw no problem with Set or Sol on this test. I used a little Polly Scale Flat Aluminium on the fabric areas
67November 14, 2021All the little bites
68November 14, 2021Kit wheel
69November 14, 2021Kit wheels
70November 14, 2021Kit wheels and landing gear
71November 14, 2021Vallejo Model Air Aluminum
72November 14, 2021
73November 14, 2021
74November 14, 2021
75November 14, 2021
76November 14, 2021
77November 14, 2021
Commentaires
5 June 2026, 10:28 -
train modeling database | gestionnaire d'inventaire

